1. Turn Off Water:    
- Shut off the main valve near the incoming water line.    
- Release water pressure by opening faucets.

2. Remove Old Filter:    
- Use the filter housing key to remove the housing.    
- Take out the used filter and empty the housing.

3. Prepare New Filter:    
- Unpack the new filter.    
- Ensure the two rubber O-rings are in place.

4. Install New Filter    
- Place the new filter in the housing, centered on the cylinder.    
- Align the filter housing O-ring and secure the housing with the key.

5. Flush and Check System    
- Turn the water back on.    
- Flush the system by running water through faucets for 1-2 minutes (approximately 3 gallons).    
- Check for leaks to ensure proper installation.

6. Finish Up    
- Close the station.    
- Dispose of the used filter.   

- Enjoy your filtered water!